Book Sections
Rizzo, F; D’Agostino, T; Pinto, F; Meo, M; High-velocity impact response on advanced hybrid composite structures, Smart Structures and NDE for Energy Systems and Industry 4.0, 10973, 109730T, 2019, International Society for Optics and Photonics
Vignjevic, R; Djordjevic, N; Wasilczuk, A; De Vuyst, T; Meo, M; On high velocity impact on carbon fibre reinforced polymers, Behavior and Mechanics of Multifunctional Materials XIII, 10968, 109680L, 2019, International Society for Optics and Photonics
Boccaccio, Marco; Fierro, Gian Piero Malfense; Meo, Michele; Development of nonlinear acoustic and air-coupled techniques for non-destructive testing, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XIII, 10971, 1097117, 2019, International Society for Optics and Photonics
De Simone, Mario Emanuele; Cuomo, Stefano; Ciampa, Francesco; Meo, Michele; Nitschke, Sandro; Hornig, Andreas; Modler, Niels; , Acoustic emission localization in composites using the signal power method and embedded transducers, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XIII, 10971, 109711O, 2019, International Society for Optics and Photonics
Fierro, Gian Piero Malfense; Meo, Michele; Nonlinear phased array imaging of flaws a modulation technique, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XIII, 10971, 1097116, 2019, International Society for Optics and Photonics
Malfense Fierro, Gian Piero; Meo, Michele; Nonlinear phased array imaging of flaws a modulation technique, Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, 10971, 2019,
Rizzo, F; Pinto, F; Meo, M; Bioinspired pseudo-ductile composite laminates with hierarchical energy absorption mechanism , Bioinspiration, Biomimetics, and Bioreplication VIII , 10593 , 105930G , 2018 , International Society for Optics and Photonics
Fierro, Gian Piero Malfense; Meo, Michele; Nonlinear imaging (NIM) of barely visible impact damage (BVID) in composite panels using a semi and full air-coupled linear and nonlinear ultrasound technique , Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII , 10599 , 105990M , 2018 , International Society for Optics and Photonics
Bucciarelli, F; Iervolino, O; Meo, M; A new membrane-type metamaterial for multiple peaks absorption at low frequencies , Health Monitoring of Structural and Biological Systems XII , 10600 , 1060011 , 2018 , International Society for Optics and Photonics
Fierro, G-P Malfense; Dionysopoulos, D; Meo, M; Ciampa, F; Damage detection in composites using nonlinear ultrasonically modulated thermography , Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII , 10599 , 105990K , 2018 , International Society for Optics and Photonics
Ciampa, Francesco; Scarselli, Gennaro; Meo, Michele; A novel nonlinear damage resonance intermodulation effect for structural health monitoring , Health Monitoring of Structural and Biological Systems 2017 , 10170 , 1017037 , 2017 , International Society for Optics and Photonics
Iervolino, Onorio; Meo, Michele; Wearable Spiral Passive Electromagnetic Sensor (SPES) glove for sign language recognition of alphabet letters and numbers: a preliminary study , Industrial and Commercial Applications of Smart Structures Technologies 2017 , 10166 , 1016607 , 2017 , International Society for Optics and Photonics
Fierro, Gian Piero Malfense; Meo, Michele; A constructive nonlinear array (CNA) method for barely visible impact detection in composite materials , Health Monitoring of Structural and Biological Systems 2017 , 10170 , 1017009 , 2017 , International Society for Optics and Photonics
Pinto, F; Rizzo, F; Meo, M; Impact resistant smart hybrid laminates , Behavior and Mechanics of Multifunctional Materials and Composites 2017 , 10165 , 101650W , 2017 , International Society for Optics and Photonics
Iervolino, Onorio; Meo, Michele; Spiral Passive Electromagnetic Sensor (SPES) for composite structural changes in aircraft structures SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring 979935-979935-10 2016, International Society for Optics and Photonics
Pinto, F; Iervolino, O; Scarselli, G; Ginzburg, D; Meo, M; Bioinspired twisted composites based on Bouligand structures SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring 97970E-97970E-13 2016, International Society for Optics and Photonics
Fierro, Gian Piero Malfense; Ginzburg, Dmitri; Ciampa, Francesco; Meo, Michele; Nonlinear thermosonics and laser vibrometry for barely visible impact damage of a composite stiffener panel SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring 980419-980419-9, 2016 International Society for Optics and Photonics
Ciampa, Francesco; Angioni, Stefano L; Pinto, Fulvio; Scarselli, Gennaro; Almond, Darrel P; Meo, Michele; Modeling of thermal wave propagation in damaged composites with internal source SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 943709-943709-14, 2015, International Society for Optics and Photonics
Scarselli, G; Ciampa, F; Ginzburg, D; Meo, M; Non-destructive testing techniques based on nonlinear methods for assessment of debonding in single lap joints SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 943706-943706-11, 2015 International Society for Optics and Photonics
Iervolino, Onorio; Meo, Michele; Spiral passive electromagnetic sensor (SPES) for smart sensing and de-icing. SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 943528-943528-14, 2015, International Society for Optics and Photonics
Ciampa, Francesco; Scarselli, Gennnaro; Ginzburg, Dmitri; Meo, Michele; Non-destructive testing techniques based on nonlinear methods for assessment of debonding in single lap joints Proceedings of SPIE-The International Society for Optical Engineering 943706, 2015 SPIE
Pinto, F; D'Oriano, G; Meo, M; Dielectric elastomer based active layer for macro-scaled industrial application in roto-flexographic printing SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring 90563G-90563G-12 2014 International Society for Optics and Photonics
F Ciampa, S Pickering, G Scarselli, M Meo, Nonlinear damage detection in composite structures using bispectral analysis, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 2014
F Pinto, G D'Oriano, M Meo, Dielectric elastomer based active layer for macro-scaled industrial application in roto-flexographic printing, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 2014
O Iervolino, M Meo, Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 2014
G.P.M. Fierro, M. Meo Baseline-free Estimation of the Residual Fatigue Life using a Modulated Nonlinear Ultrasound Method, IWSHM 2013, Stanford, USA
F. Ciampa, M. Meo, Detection of Impact Damage using a Nonlinear Ultrasound Approach, IWSHM 2013, Stanford, USA
De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. and Angioni, S. L., 2011. A Comparison between Optimized Active Thermography and Digital Shearography for Detection of Damage in Aerospace Composite Structures. In: Buyukozturk, O., Tasdemir, M. A. G. O. and Akkaya, Y., eds. Nondestructive Testing of Materials and Structures. Springer.
Ciampa, F., & Meo, M. (2012). Imaging non-classical elastic nonlinearities using reciprocal time reversal and phase symmetry analysis. Proceedings of SPIE - The International Society for Optical Engineering, 8348.
Pinto, F., Ciampa, F., Polimeno, U., & Meo, M. (2012). In-situ damage detection in SMA reinforced CFRP. Proceedings of SPIE, 8345.
Ciampa, F., & Meo, M. (2011). Acoustic emission source localization in anisotropic structures with diffuse field conditions using a time reversal approach. Proceedings of SPIE - The International Society for Optical Engineering, 7984.
Dolce, F., Meo, M., Wright, A. and French, M., 2009. Structural response of laminated composite plates to blast load. In: ICCM-17 - 17th International Conference on Composite Materials. Piscataway, NJ: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)
Meo, M. and Polimeno, U., 2007. Development of a single mode nonlinear acoustic resonance method for the detection of delamination due to low velocity impact. In: Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)
Meo, M., Zumpano, G., Meng, X., Roberts, G., & Dodson, A. (2004). Identification of Nottingham Wilford Bridge modal parameters using wavelet transforms. In: Smart Structures and Materials 2004: Modeling, Signal Processing, and Control. (pp. 561-570). (Proceedings of the SPIE). SPIE.
Meo, M., & Zumpano, G. (2004). Optimal sensor placement on a large-scale civil structure. Proceedings of SPIE - The International Society for Optical Engineering, 5394(108).
Zumpano, G. , & Meo, M. (2004). A new damage detection technique for rails based on wave propagation. In: Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and AerospaceSystems. (pp. 482-491). (Proceedings of the SPIE). SPIE.