AntonyMileham 
Full Name: Professor Antony
Roy Mileham BSc PhD CEng IEE
Post: Head of Department of
Mechanical Engineering
Head
of Manufacturing Group
Postal
Address:
Department of Mechanical
Engineering,
Telephone:
Business: 01225 826462
Home: 01225 764556
Fax:
01225 826928
Email: A.R.Mileham@bath.ac.uk
CURRICULUM
VITAE
Academic and Professional
Qualifications
B.Sc. Honours lst class, Production Engineering, Coventry Polytechnic
(CNAA) l969
Ph.D. Electrochemical machining,
Coventry Polytechnic (CNAA), l984
Chartered Engineer (CEng)
1979
Member of Institution of Electrical
Engineers (MIEE) Manufacturing Division, 1976
Miscellaneous
Indentured
Apprenticeship
Freeman of the City of
Ford Motor Co. Ltd., Short Term
Industrial Fellowship l988 to 1991
Erskine Fellow,
Research
Interests
- Manufacturing Systems Design and
Simulation
- Manufacturing Process Modelling
- Design for Manufacture and
Assembly
- Set-Up Reduction Techniques/Rapid
changeovers
- Welding
- Electrochemical Machining
- Assembly Systems
- Electroplating
- Computer Aided Process Planning
(CAPP)
Major
Research Grants and Contracts
EPSRC and Industry
1988
to 1988
£250
Imperial Tobacco Ltd, Project Sponsorship.
1989
to 1989
£7 400
Ford Motor
of manufacturing systems.
1989
to 1992
£57 587
SERC/ACME, GR/F 71904, Cost estimation of polymers
at the conceptual stage of design, Principal Investigator
with A.W. Miles & D.T. Bradford.
1989
to 1995
£4 500
Small Piece Trust, Cost Estimation at the Concept Stage of
Design, Principal Investigator with A.W. Miles, D.T.
Bradford.
1991
to 1994
£149 132
SERC/ACME & CMB, GR/H 21364, The design of
fast tool
changing systems, Sept l99l, co‑investigator with S.J.
Culley.
1991
to 1991
£14 204
Rolls‑Royce plc, ECM Process Modelling Part 1, principal
Investigator with Dr H. Hardisty.
1992
to 1992
£14 476
Rolls Royce plc, ECM Process Modelling Part 2, Principal
Investigator with Dr H. Hardisty.
1992
to 1992
£3 363
Rolls‑Royce plc, ECM Process Modelling - Accuracy Tests,
Principal Investigator with Dr H. Hardisty.
1993
to 1993
£1 828
Rolls Royce plc, ECM Process Modelling - Current Density
Analysis, Principal Investigator with Dr H.
Hardisty.
1993
to 1996
£135 099
EPSRC /DIPG, GR/K30513, Modelling of the Electrochemical
Machining Process, Principal Investigator with Dr H.
Hardisty.
1993
to 1996
£10 800
Rolls-Royce Plc, Modelling of the Electrochemical Machining
Process, in conjunction with GR/K30513, Principal Investigator with
Dr H. Hardisty.
1997
to 1999
£13 000
Royal Commission of 1851 Industrial Fellowship Supervisors
Grant.
With S J Culley.
1997
£500
Royal Society Grant to attend and present paper at CIRP
conference in
1999 to 2000
£37 303
EPSRC, GR/M83872/01. Modelling diffusion in
heterogeneous welds using the finite volume method, with Dr C
S Kirk.
1999 to 2002
£91 005
EPSRC, GR/M96469. Modelling the electroplating process,
with Prof A N Bramley and Dr H Hardisty.
1999
to 2002
£4 000
Glacier Vandervell Bearings, Modelling the electroplating
process, with Prof A N Bramley and Dr H
Hardisty.
2000 to 2002
£90 978
EPSRC, GR/N21512. An investigation to reduce the
run-up
stage of changeover, Principal Investigator with S J Culley,
Dr G W Owen and Dr L B Newnes.
2000
to 2002
£4 000
Nestles UK Foods, An investigation to reduce the
run-up stage of changeover, Principal Investigator with S J
Culley, Dr G W Owen and Dr L B Newnes.
2000
to 2001
£47 650
EPSRC, GR/N21079 A study into the impact of design on the
sustainability of changeover initiatives, co-investigator
with S J Culley, Dr G W Owen.
2001
to 2002
£58 237
EPSRC, Influence of control strategies on the quality of
thermoplastic injection moulded parts (Visiting Fellow Prof
Kim Stelson), Co-investigator with Prof K A
Edge.
2002
to 2003
£54 018
EPSRC, Modelling and Simulation of cardiovascular and
dermal in vitro tissue engineering using the Finite Volume
Method. Co-investigator with Dr J B Chaudhuri (Chem Eng) and Prof M Horrocks
(Medical sciences)
2002
to 2002
£ 6600
Food Faraday, Identification of future research areas at
Ginsters Ltd and
Kelloggs (
2001
to 2006
£3.900 M
EPSRC, University of
Research Centre. Co-investigator with Prof C R
Burrows
2002
to 2004
£0.756 M
Research equipment and refurbishment of Manufacturing
facilities
2003
to 2006
£198 247
IMRC, Incremental Sheet Forming, Co-investigator
with Prof A N Bramley and Dr G W Owen. (EK114)
2003
to 2005
£102 375
IMRC, Distributed Cognition, co-investigator with
G Mullineux.
(EP051).
2004
to 2006
£180 950
IMRC, Design for Changeover , co-investigator
with
S
J Culley, Dr G W Owen. (EP055).
2004to
2006
£99 584
IMRC, Modelling the Electroplating Process in 3D,
Principal
Investigator with Prof A N Bramley and Prof F Walsh.
(EP059).
2004
to 2006
£130 838
IMRC, Design of Walking Worker Assembly Lines ,
co-
investigator with Dr G W Owen. (EP062).
2004
to 2004
£6049
EPSRC(£4049) and IMRC(£2000), Incremental
Sheet
Forming,
Workshop, Co-investigator with Prof A N Bramley and Dr G W Owen.
(b) Teaching Company Grants/Knowledge
Transfer Partnerships - EPSRC/DTI/Industry
1987
to 1991
£232 513
Lansing-Linde, GR/E64350, Principle
Investigator with
A.W. Jeffries and Professor T. Hill
(Management).
1989
to 1991
£ 23 910
Lansing-Linde, Additional equipment grant,
GR/E64350
1989
to 1992
£105 672
Mycalex, GR/F41884, Co‑investigator - with
Prof. D. Rodgers
(Electronic and Electrical Engineering).
1992
to 1995
£187 603
S & D Cartons Ltd, GR/H54492, Principal Investigator with
Dr A. Bowyer and Dr R. Green.
1992 to 1994
£129 956
Jani-Jack Ltd, GR/H81450, co-investigator with
A.W. Miles.
1993
to 1996
£66 122
Welton Packaging Ltd, GR/J 57254, (£37813 TCD +
£28309
Industry),
Principal Investigator with S J Culley
1994
to 1996
£148 651
Anchor Foods Ltd,
GR/J72257, (£86 670 TCD + £63 455
Industry), co-investigator with S. J. Culley A. W. Jeffries and Dr
S. J. Wright (Biological Sciences).
1994
to 1997
£172 348
Horstmann Timers & Controls Ltd, GR/J61220,
(£127 837
TCD + £46 573 Industry), co-investigator with Dr R.
T.
Lipczynski
(Electronic and Electrical Engineering), Dr L. B. Newnes and A. W.
Jeffries.
1996
to 1999
£66 658
Rexam Flexible Packaging, No 1702, (£25 980 TCD + £40
678
Industry), co-investigator with S. J. Culley
1996
to 1997
£151 550
Mac-Door Industries, No 1803 , (£121 240 TCD + £
30 310
Industry), co-investigator with Prof. A. J. Medland and Dr P. K.
Chawdhry.
1996
to 1999
£73 260
Rotork Controls Ltd, No 2079, (£34 260 TCD + £39 000
Industry),
Principal Investigator with A. W. Jeffries.
1997
to 1999
£82 010
Pipeline Products Ltd, No 2320, (£62510 TCD + £ 19 500
Industry),
Principal Investigator with A.N. Bramley.
1998
to 2000
£153 808
Bailey Caravans Ltd, No 0000, (£104 208 TCD + £49 600
Industry), co-investigator with Dr J Darling, Dr G W Owen.
1999
to 2000
£76 904
Amba Medical Ltd, No 2698, (£ 52104 TCD + £24
800
industry), Principal Investigator with A. W.
Jeffries.
2000
to 2002
£171 224
EFI Ltd, No 3022 (£ 118 224 TCD + £56 000 industry), co-
investigator with Dr T Mays (Chem
Eng) and Dr L B Newnes.
2000
to 2002
£171 224
Audience Systems Ltd, No 3197 (£118 224 TCD +
£56000 industry), Principal Investigator with Dr G W
Owen.
2001
to 2003
£89 612
Appeal Conservatory Blinds Ltd, No 3279 (£60 612 TCD +
£29 000 industry), Principal Investigator with A W
Jeffries.
2001
to 2003
£87 112
Colston Ltd, No 3332 (£59 112 TCD +£28 000 industry),
Principal Investigator with Dr G W Owen and Dr L B
Newnes.
2001
to 2003
£168 416
Pall
Principal investigator with Dr G W Owen.
2004
to 2006
£104 283
Appeal Conservatory Blinds Ltd, part 2 (£50 283 TCD +
£54 000 industry), Principal Investigator with Dr G W
Owen.
2004
to 2006
£185 392
TUV Ltd, (£89 392 TCD + £96 000 industry), Principal
Investigator with C A McMahon, Dr L B Newnes and Dr G W
Owen.
European FR6 Involvement
1. M4, Multi-Material Micro Manufacture, Network of
Excellence, 15 Core partners led by
2.
VRL-KMIP, Virtual Research Laboratory in Knowledge management in Production,
Network of Excellence, led by
3.
ViF, Virtual Forming, Network of Excellence, led
by
Publications
Edited Works
B1. Bramley A.N. and
Mileham A.R., editors, Advances in Manufacturing Technology VII, Bath University
Press, Proc 9th National Conference on Manufacturing Research, September 1993,
457 pages, ISBN No 1 85790 005 7, (80%)
B2. Bramley
A.N., Mileham A.R. and Owen G. W., editors, Advances in Manufacturing Technology
X, Bath University Press, Proc 12th National Conference on Manufacturing
Research, September 1996, 540 pages, ISBN No 1 85790 031 607,
(50%)
B3. Shirvani B., Mileham A.R. and Culley S.J., editors, Set-Up
Reduction Techniques a practical approach with 200 ideas for implementation, UCE
Press 1996, ISBN 0 9527664 2 6 (50%)
B4. Bramley
A.N., Mileham A.R. Newnes L.B. and Owen G. W., editors, Advances in
Manufacturing Technology XIII - Proc 15th National Conference on Manufacturing
Research, Professional Engineering Publications (IMechE), September 1999, 499
pages, ISBN No 1 86508227 3, (25%)
B5. McIntosh
R.I., Culley S.J., Mileham A.R. and Owen G.W., Improving Changeover Performance
- a strategy for becoming a lean, responsive manufacturer,
Butterworth-Heinemann. Published
October 2001, ISBN 0-7506-5087-7 (25%)
B6
Bramley A.N., Mileham A.R. Newnes L.B., Owen G.W., Culley S.C., McMahon
C.A. editors of IDMME 2004, University of Bath April 2004, ISBN 1-85790-129-0
Journal
Articles
J1. Mileham
A.R., Brown D., "The specification and microsurface
analysis of abrasively blasted low carbon steel", Metal Working Production,
January l98l, p 97, (95%)
J2. Mileham
A.R., Jones R., Harvey S.J., "Changes in valency state
during ECM", Precision Engineering, Vol. 3, No. 3, pp 168-170, l982, ISSN
0141-6359, (95%)
J3. Mileham A.R.,
Harvey S.J., Stout K.J., "The characterisation of ECM surfaces", Wear, Vol. l09,
No. l. pp 207‑214, l986, ISBN 0-444-75040-1, (95%)
J4. Mileham
A.R., Harvey S.J., Stout K.J., "The characterisation of ECM surfaces", Jn. of Advanced Machine Technology & Development
Association, Japan, No 15, pp 32-35, March l987-7, ISBN
(95%)
J5. Isik, I., Mileham, A.R., "Automated feature ordering for
generative process planning systems", Expert Systems - The International Journal
of Knowledge Engineering, Vol 9, No. 3, August l992, pp l-5, ISSN
0266-4720.(80%)
J6. Mileham
A.R., Currie G.C., Miles A.W. & Bradford D.T., " A parametric approach to
cost estimating at the conceptual stage of design", Journal of Engineering
Design, Vol. 4, No 2, 1993, pp 117-125, ISSN 0954-4828, (90%)
J7. Hardisty
H., Mileham A.R. & Shirvani H., " A finite element model of the Electrochemical Machining Process",
Annals of CIRP Vol. 42/1/1993 pp
201-204, ISBN 3 905 277 19 0,
(50%)
J8. Gest G.B., Culley S.J., McIntosh R.I, Mileham A.R., Owen
G.W. "Review of fast tool change systems", International Journal of Computer
Integrated Manufacturing Systems, Vol. 8, No 3 1995, pp 205-210 ISSN 0951-5240,
(40%)
J9. Hardisty
H., Mileham A.R. & Shirvani H., " Analysis and
computer simulation of the electrochemical machining process: a stepped moving
tool eroding a plane surface", Proceedings Institution of Mechanical Engineers,
Part B Journal of Engineering Manufacture, Vol. 210, No B2, pp 109-118, 1996,
ISSN 0954-4054, (45%)
J10. McIntosh R.I., Culley
S.J., Gest G.B., Mileham A.R. and Owen G.W.," An
assessment of the role of design in the improvement of changeover performance",
International Journal of Operations and Production Management, Vol. 16, No 9, pp
5-22, Sept 1996, ISSN 0144 3577. (25%). Best
paper prize in journal for 1996.
J11. Kirk C.S.,
Mileham A.R., “The influence of electrode extension on cored wire welding
quality”, Construction Monthly, Published by Franklin Publishing Inc,
Birmingham, USA, Vol. 2, No 5, pp 65-68, May 1996. (50%)
J12. Fernihough A.M., Culley S.J., Mileham A.R., “An integrated
business modelling technique for decision support in the manufacturing
environment ”, Concurrent Engineering: Research and Applications, Vol. 5, No 1,
pp 5-12, March 1997, ISSN 1063 293X. (45%)
J13. Hardisty H., Mileham
A.R. & Shirvani H., " Theoretical and
computational investigation of the electrochemical machining process for
characteristic cases of a stepped moving tool eroding a plane surface",
Proceedings Institution of Mechanical Engineers, Part B Journal of Engineering
Manufacture, Vol. 211, B3, pp 197-210, 1997, ISSN 0954-4054,
(50%)
J14. Mileham A.R. Culley
S.J., McIntosh R.I., Gest G.B. and Owen G.W.," Set-up
reduction (SUR) beyond total
productive maintenance (TPM)", Proceedings Institution of Mechanical Engineers,
Part B Journal of Engineering Manufacture, Vol. 211, pp 253-260, 1997, ISSN
0954-4054, (60%)
J15. Balogh A., Kirk C.S., Mileham A.R., “A new heat flow model
for medium size plates”, GEP (Journal of the Hungarian Institution of Mechanical
Engineers, Vol. IL (1998), No 6, pp 20-25, ISSN 0016-8572,
(40%)
J16. Mileham A.R,
Culley S.J., McIntosh R.I., Owen G.W. "Rapid changeover – a pre-requisite for
responsive manufacture”, International Journal of Operations and Production
Management, Vol. 19, No 8, pp 785-786, Aug 1999, ISSN 0144 3577,
(80%).
J17. Hardisty H., Mileham
A.R., " Finite element computer investigation of the electrochemical machining
process for a parabolically shaped moving tool eroding
an arbitrarily shaped workpiece", Proceedings
Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture,
Vol. 213, No B8, pp 787-798, 1999, ISSN 0954-4054, (50%)
J18. Kirk C.S.,
Mileham A.R., “Simulation of atomic diffusion in heterogeneous transition welds
using finite volume method”, Sudura - Journal of the
Romanian Welding Society, Vol. IX, No 4, December 1999, pp 8-16,
(40%).
J19. Kirk C.S., Tisza
M., Balogh A., Mileham A.R., “Modelling moving surface
boundaries in multi-phase, visco-plastic and elasto-plastic flows using a novel polymorphic cell", GEP
(Journal of the Hungarian Institution of Mechanical Engineers, Vol. 3-4 (2000),
No Szam, pp 24-27, ISSN 0016-8572,
(25%).
J20. Doniavi A., Mileham A.R., Newnes L. B., “A systems approach
to photolithography process optimisation in an electronics manufacturing
environment”, International Journal of Production Research, Vol 38, No 11, pp
2515-2528, ISSN0020-7543, (40%).
J21. McIntosh R.I.,
Culley S.J., Mileham A.R. and Owen G.W.," A critical evaluation of Shingo's SMED
(single minute exchange of dies) methodology", International Journal of
Production Research, Vol 38, No 11, pp 2377-2393, ISSN0020-7543,
(40%).
J22. Kirk,
C.S., and Mileham, A.R., “Application of the Finite Volume Method to Prediction of Failure Zones in Creep
resistant Steel”s, Materials Science Testing and
Informatics, Materials Science Forum, ed. J. Gyulai,
Vol 414-415, Year 2003, ISBN 0 87849
908 3, pp431-438, Trans Tech Publications Inc,
J23.
J24. Doniavi A., Mileham A.R., Newnes L. B., “A systems approach
to electronic assembly optimisation”, Proceedings Institution of Mechanical
Engineers, Part B Journal of Engineering Manufacture, Vol. 215, No B10, pp
1409-1415, 2001, ISSN 0954-4054, (40%).
J25. Newnes L.B., Mileham A.R. and Doniavi A.,
“A Systems Approach to Semiconductor Optimisation”, Transactions IEEE,
(40%). IEEE Transactions on Electronics Packaging
Manufacturing. Vol. 24,
No.3, July 2001 pp 171-177, ISSN 1521-334X.
J26. Bramley A N,
Mileham A R, Hardisty H, Masuku E S, Johal C and Detassis P, " A Finite Element Simulation of the
Electroplating Process", Annals of CIRP Vol. 51/1/2002, pp 169-172, Aug 2002.
(90%).
J27
Kirk, C.S., Bodamyali,T., Stevens, C.R., &.Mileham, A.R., (2002),
Computer Modelling and Experimental Validation of Smooth Muscle cell growth
using Matrigel as a Basement Membrane Matrix, European Journal of Cells and Materials,
Vol IV, Supplement 2, Dec 2002, p15,
(Abstracts of TCES 2002 - Annual meeting of the UK Tissue and Cell Engineering
Society 19-20 September 2002, The University of Glasgow, Scotland), ISSN
1473-2262. (25%).
http://www.eurocellmat.org.uk/index.htm.
J28 Kirk, C.S.,
Horrocks, M., Mileham, A.R., & Chaudhuri, J.B., (2002), Modelling and Simulation of
Vascular Tissue Engineering using the Finite Volume Method, European Journal of
Cells and Materials, Vol IV,
Supplement 2, Dec 2002, p141, (Abstracts of TCES 2002 - Annual meeting of
the UK Tissue and Cell Engineering Society 19-20 September 2002, The University
of Glasgow, Scotland), ISSN 1473-2262. (25%).
http://www.eurocellmat.org.uk/index.htm.
J29 Kirk, C.S.,
and Mileham, A.R., (2002), Modelling Oxygen Availability in Blood serum, perfleurocarbons and Aqueous Based Medium, European Journal
of Cells and Materials, Vol IV,
Supplement 2, Dec 2002, p110, (Abstracts of TCES 2002 - Annual meeting of
the UK Tissue and Cell Engineering Society 19-20 September 2002, The University
of Glasgow, Scotland), ISSN 1473-2262. (25%).
http://www.eurocellmat.org.uk/index.htm.
J30 Culley S.J., Owen
G.W, McIntosh R.I. and Mileham A.R. “Sustaining Changeover Improvement",
Proceedings Institution of Mechanical Engineers, Part B Journal of Engineering
Manufacture, Vol 217,NoB10, Oct 2003, pp1455-1470, ISSN 0954-4054,
(25%).
J31 Mileham A
R, Culley S.J., Owen GW, Newnes LB, Giess MD, Bramley
AN, “The impact of
run-up in ensuring Rapid Changeover”, Annals of
CIRP Vol. 53/1/2004, pp, 407-410, Aug 2004.
J32 Mebrahtu H, Walker R, Mileham A R , “ Performance
Enhancement Using an Expert Mechanism in a Manufacturing Simulator”, Proceedings
Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture,
Short Communications in Manufacture and Design, Vol 218, NoB2, 2004, pp 245-249,
ISSN 0954-4054
J33. Mileham A.R.,
Morgan E.A., Chatting I., “An attribute management approach to concurrent
engineering”, Proceedings Institution of Mechanical Engineers, Part B Journal of
Engineering Manufacture, Vol. 218, No B8, pp, 995-1003, 2004, ISSN 0954-4054,
(80%).
J34
Fronimidis D., Edge K.A., Stelson K.A., Mileham A.R., Sokola
M.A., "Use of non-invasive
measurements methods to aid the
control of part quality in the injection moulding process", Proceedings
Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture,
Short Communications in Manufacture and Design, Vol X, NoB9, pp 1195-1202, Sept 2005, ISSN 0954-4054
(20%)
J35
Busby, J.S., Hibberd, R.E., Mileham,
A.R. and Mullineux, G., "Failure Analysis of Organisational Artefacts
that Protect Systems", Proceedings Institution of Mechanical Engineers,
Part B Journal of Engineering Manufacture, Short Communications in Manufacture
and Design, Vol 218, NoB9, pp
1211-1216, Sept 2005, ISSN 0954-4054
(20%)
J36 Tiwari M. K., Prakash, Kumar A.,
Mileham A.R., "Determination of optimal assembly sequence using psycho-clonal
algorithm", Proceedings Institution of Mechanical Engineers, Part B Journal of
Engineering Manufacture, Vol. 219, No B1, pp 137-149, Jan 2005, ISSN 0954-4054,
(50%).
J37 Wang Q., Owen
G.W., Mileham A.R. “Comparison between fixed and walking worker assembly lines”
Proceedings Institution of Mechanical Engineers, Part B Journal of
Engineering Manufacture, Short Communications in Manufacture and Design, Vol
219, NoB11 November, JEM358SC, pp
845-848 , ISSN 0954-4054,
(30%).
J38
reinterpreting
Shingo's SMED methodology”, Journal of IEEE
Transactions on Engineering Management, Vol XX, No XX, pp XX , ISSN,
(25%). Accepted for publication July 05.
J39 Allwood J.M. Bramley A.N. Ridgman
T.W. Mileham A.R. “Novel method for
the rapid production of inexpensive dies and moulds with surfaces made by incremental sheet forming”,
Proceedings Institution of Mechanical
Engineers, Part B Journal of Engineering Manufacture, Short Communications in
Manufacture and Design, Vol X, NoX, pp XX, X 2005, ISSN 0954-4054 (20%).
J40 Eriksson
K.M., Mileham A.R., Newnes L.B., “A comparison of changeover sensitive scheduling rules and conventional
scheduling rules over different levels of changeover time reduction”, International
Journal of Operations Research, Submitted Dec 05
J41 Wang Q., Owen G.W., Mileham A.R.
"Determining numbers of workstations and operators for a linear
walking-worker assembly line", IJCIMS, Accepted for
publication
International Refereed
Conferences
I1. Mileham A.R., Harvey S.J., Stout K.J., "The characterisation of ECM
surfaces", Proc. 3rd Int. Conf. Metal & Props. of Eng. Surf., Teeside Polytechnic,
April l985, (95%)
I2. Isik I , Mileham A.R., "Automated
feature ordering for generative process planning", Proceedings 10th Int. Conf.
on Prod.
I3. Zhang Y.,
Mileham A.R., "A CAD interpreter for interfacing CAP and CAP for 2D rotational
parts", 6th Int. Conf. on CADCAM and Factories of the Future, South Bank
Polytechnic, August l99l, pp 8-13, ISBN 1 874418 00 4/01 2/02 0,
(50%)
I4. Currie
G.C., Mileham A.R., Miles A.W. & Bradford D.T., "Cost estimation at the
conceptual stage of the design process", 6th Int. Conf. CADCAM & Factories
of the Future, South Bank Polytechnic, August l99l, pp 600-605, ISBN 1 874418 00 4/01 2/02 0,
(70%)
I5. Rustom, E.A., Mileham A.R. "Automated decision making for
process planning" in Flexible Automation & Information Management, pp
519-530, Ed Eyada & Ahmad CRC Press, July 1992,
0-8493-0138-6 (Proceedings 2nd International Flexible Automation and Information
Management Conference, Virginia, USA), (50%)
I6. Mileham
A.R., Currie G.C., Miles A.W. & Bradford D.T., " Computer based cost
estimating for conceptual design", Proc International Forum on Design for
Manufacture and Assembly (Boothroyd & Dewhurst
Inc), June 1993, Newport, RI, USA, (80%)
I7. Hardisty
H., Mileham A.R. & Shirvani H., " A model of the
electrochemical machining process", Pro 2nd Int. Conf on Computational Modelling
of Free and Moving Boundary
Problems, Milan ,June 1993, pp 453-460, ISBN 1-85312-242-4, (50%)
I8. Scott A.J.
and Mileham A.R. " A new system to nest sheet metal parts which have been
enclosed within rectangular envelopes", Proceedings of the Second International
Conference on Sheet Metal held at the University of Ulster, N. Ireland. pp
63-74. 12th-13th April 1994, (50%)
I9. Scott A.J.
and Mileham A.R., "A new system to nest sheet metal parts in the 'low volume,
high variety' environment", Proceedings of the First International Conference on
Manufacturing Processes, Systems and Operations Management in Less
Industrialised Regions, National University of Science and Technology.
I10. Fernihough A.M. Culley S.J. Mileham A.R., "A financial model
for set-up reduction (SUR) justification "in Flexible Automation &
Information Management, pp 198-207, Ed
Ahmad & Sullivan Begell House Inc, May
1994, 1-56700-018-5 (Proceedings 4th International Flexible Automation &
Information Management Conference, Virginia Polytechnic Institute and State
University, Virginia, USA), (25%)
I11. Mileham A R, Hardisty
H, Shirvani H, "Electrochemical machining using
computer simulation", Proc 10th ISPE/IFAC Int. Conf on CAD/CAM, Robotics and
Factories of the Future, Ottawa, Canada, August 1994, pp 81-86, ISBN
1-895634-06-7, (50%)
I12. Gest G.B., Culley S.J., McIntosh R.I, Mileham A.R., Owen
G.W., "Classification methodologies for set-up reduction techniques within
industry", 4th Int. Factory 2000 Con, IEE Conf Publication No 398, pp 486-490,
October 1994, University of York, (20%)
I13. McIntosh R.I., Gest G.B., Culley S.J., Mileham A.R., " Achieving and
optimising flexible manufacturing performance on existing manufacturing
systems", 4th Int. Factory 2000 Con, IEE Conf Publication No 398, pp 491-495,
October 1994, University of York, (20%)
I14. Lanham J.D., Smith G.,
Mileham A.R., "Integrated modelling and optimisation of manufacturing systems",
4th Int. Factory 2000 Con, IEE Conf Publication No 398, pp 110-115, Oct 1994,
University of York, (10%)
I15. Mileham A.R. "The use
of group projects for the integration of design manufacturing and marketing",
Poc of 2nd Int. Symp in
Engineering Education - Product development in Engineering education, pp
245-250, University of Limerick, October 1994, (100%)
I16. Kirk, C.S.,
Mileham, A.R., and Yeo, R.B.G., (1995), “The role of
wire resistivity in
semiautomatic welding quality; Part II”, Proceedings of the
Third International
Conference on Sheet Metal,
University of Central England, 26-28 June 1995, (Shirvani, B., Singh, U.P., and Kals, H.J.J., eds.), pp. 240-247.
I17. Culley S.J., Mileham
A.R, McIntosh R.I., Owen G.W., Gest G.B "Design for changeover - products,
machines, tooling and systems", Proc 3rd Int. Conf on Sheet Metal, University of
Central England, June 1995, pp 77-85, ISBN 0-9527-664-0-X, (90%)
I18. Mileham A.R., Hardisty
H., Shirvani H., "A 2-D thermal model of the
electrochemical machining process", Proc IX Int. Conf on Numerical Methods in
Thermal Problems,
I19. McIntosh R.I., Culley
S.J., Mileham A.R, Owen G.W., Gest G.B "The
role of rapid changeover in adapting manufacturing systems for lean
manufacture", Proc 5th Int. EAEC (European Automobile Engineers Co-operation)
Congress - Lean Product Development and Manufacture, Strasbourg (France), pp
SIA9506D10, June 1995, EAEC/SIA. (20%)
I20. Fernihough A.M., Culley S.J., Mileham A.R., Owen G.W., "The
development of a technique for the evaluation of business strategies" Proc
Concurrent Engineering Conference, (CE95), Virginia USA August 1995, pp 521-528,
Concurrent Technologies Corporation, ISBN 0-9642499-1-8,
(20%)
I21. Mileham A.R, Culley
S.J., Owen G.W., McIntosh R.I., " Design for changeover - a pre-requisite for
lean manufacture.", Proc 28th International Symposium of the Automotive
Technology and Automation (ISATA) on Lean/Agile Manufacturing in the Automotive
Industries, pp 201-208, Stuttgart Germany, September 1995, Published by
Automotive Automation Ltd, ISBN 0-947719-76-8, (95%)
I22. Kirk C.S. and
Mileham A.R., "An evaluation of flux cored wire metal-arc welding and its affect
on cost of production", Proceedings of the Second International Conference on
Manufacturing Processes, Systems and Operations Management in Less
Industrialised Regions, National University of Science and Technology.
I23 Kirk C.S. and
Mileham A.R., "The significance of electrode extension on critical cooling rates
and the heat affected zone", Proceedings of the Second International Conference
on Manufacturing Processes, Systems and Operations Management in Less
Industrialised Regions, National University of Science and Technology.
I24 Culley S.J.
and Mileham A.R., “Changeover strategies for agile manufacture”, Proceedings of the 3rd
International Conference of the European Operations Management Association on
Manufacturing Strategy - operations strategy in a global context, ed. by Voss
C.A., London Business School, 2nd-4th June 1996, pp 147-152, (25%).
I25 Mileham
A.R. and Scott A.J., “A new algorithm for nesting sheet metal components”,
Proceedings of the 12th International Conference on CAD/CAM Robotics and
Factories of the Future, University of Middlesex, 14-16 August 1996, pp
1048-1053, ISBN 1 89825303X, (80%).
I26 Hardisty
H., Shirvani H., Mileham A.R., "A 2-D model of the
electrochemical machining Process", Proceedings of the 12th International
Conference on CAD/CAM Robotics and Factories of the Future, University of Middlesex,
14-16 August 1996, pp 849-853, ISBN 1 898253 03 X, (80%).
I27 Fernihough A.M., Culley S.J., Mileham A.R., “Decision
support in factories of the future: an integrated business modelling technique”,
Proceedings of the 12th International Conference on CAD/CAM Robotics and
Factories of the Future, University of Middlesex, 14-16 August 1996, pp 769-774,
ISBN 1 898253 03 X, (10%).
I28 Shirvani H., Hardisty H., Mileham A.R., “ Finite Element
moving boundary technique
for automatic design of ECM tooling”, Proceedings of the 27th Int. Symp on Industrial Robots, SIRI, Milan, 6-10 October 1996,
pp 293-298, (60%)
I29 Kirk C.S.,
Shirvani H., Rees D.A.S., Mileham A.R., “Mathematical
prediction of the weld thermal cycle and HAZ microstructure”, Proceedings
of the 2nd International Conference on Coasts, Ports and Marine Structures, Iran
University of Science and Technology, Iran, 1-4 December 1996, pp 159-173.
(15%)
I30 Mileham
A.R., Hardisty H., Shirvani H., Clifton D.A.,
"Simulating the electrochemical machining (ECM) process - a die design aid ",
Proceedings of the International Conference on Design and Production of Dies and Molds, CIRP, Istanbul, Turkey, 19-21 June 1997, pp163-168,
ISBN 975 429 106 3, (80%).
I31 Culley S.J.,
Mileham A.R, McIntosh R.I., Owen G.W., Gest G.B "Rapid changeover of dies and molds ",
Proceedings of the International Conference on Design and
Production of Dies and Molds, CIRP, Istanbul, Turkey, 19-21 June 1997, pp 393-398,
ISBN 975 429 106 3, (80%).
I32 Shirvani H., Mileham A.R., Hardisty H., “ A finite element moving boundary technique
for modelling the electrochemical machining process”, Proceedings of the 2nd
Int. Conf on the application of numerical methods in engineering, University of
Putra, Malaysia, 23-25 June 1997, pp 488-499, ISBN 983-9319-21-3, (60%).
I33 Masuku E. S. Mileham A. R. “Product based heuristics for
automated mould design for injection moulding”, Proc of the International
Conference on Advances in Materials and Processing Technology (AMPT97),
22-26th, Portugal, August, 1997, pp 530-533, ISBN 972-97407-0-4,
(50%)
I34 Doniavi A. Mileham A. R., Newnes L. B. “Systems modelling
methodologies in the electronic manufacturing environment”, Proc 15th IMACS
World Congress on Scientific Computation, Modelling and Applied Mathematics ed.
by Achim Sydow, Berlin,
August, 1997, pp 373-378, ISBN 3-89685-555-7, (50%)
I35 Mileham
A.R., Hardisty H., Shirvani H., Clifton D.A.,
"Integrating tool design and manufacture
for electrochemical machining (ECM) using process simulation ", Proceedings of the
10th ADM conference - International Conference on design tools and methods in
industrial engineering, ADM,
Florence, Italy, 17-19 September 1997, pp 785-796, ISBN 88 7957 113 3,
(80%).
I36 Doniavi A. Mileham A. R., Newnes L. B. “Computer integrated
systems assembly modelling in electronics industrial engineering”, Proceedings of the 10th
ADM conference - International Conference on design tools and methods in
industrial engineering, ADM,
Florence, Italy, 17-19 September 1997, pp 179-188, ISBN 88 7957 113 3,
(80%).
I37 Masuku E., Mileham A.R., "Automatic moulding orientation
heuristics in mould design for injection moulding", Proceedings of the Third
International Conference on Manufacturing Processes, Systems and Operations
Management in Less Industrialised Regions, National University of Science and
Technology, Bulawayo, Zimbabwe. 20-22 April, 1998, pp 96-105,
(50%), ISBN 0-7974-1794-X.
I38 Kirk C.S.,
Balogh A., Komblodi A.,
Mileham A.R., “Improvements in CAD/CAM through modelling the weld thermal
cycle”, Proceedings MicroCAD 98 international computer
science conference, University of Miskolc, Hungary, Feb 25-26 1998, pp 79-83,
(10%).
I39 Balogh A., Beres L., Kirk C.S.,
Mileham A.R., “Predicting the austenite grain size and homogeneity using
continuous heat flow equation”, Proceedings MicroCAD
99 international computer science conference, University of Miskolc, Hungary,
Feb 24-25 1999, pp 13-18, (10%).
I40
Kirk, C.S.,
I41 Doniavi A. Mileham A. R., Newnes L. B. “Optimising
electronic manufacturing processes”, Proceedings of the 24th -
International Electronics Manufacturing Technology Symposium (1999 IEMT Symp), IEEE, Austin,
Texas, USA, 18-19 October 1999, pp 63-68, ISBN 0 7803 5502 4, ISSN 1089-8190,
IEEE Catalog No - 99CH36330,
(30%).
I42 Kirk C.S.,
Tisza M., Balogh A., Mileham A.R., “Modelling moving
surface boundaries in multi-phase, visco-plastic and
elasto-plastic flows using a novel polymorphic cell”,
Proceedings MicroCAD 2000 international computer
science conference, University of Miskolc, Hungary, Feb 23-24, 2000, pp 39-44,
(10%).
I43 Mileham
A.R., Owen G.W, Jeffries A.W., "The introduction of advanced technology into a
micro-company", 3rd International SMESME conference, University of Coventry,
April 2000, pp 512-519, ISBN 0905949862, (90%).
I44
Jeffries A.W., Mileham A.R., Jopling
R.D., "Manufacturing change control through teamwork - a case study", 33rdCIRP
International Seminar on Manufacturing Systems, The Royal Institute of
Technology (KTH), Stockholm, Sweden, 5-7 June 2000, pp 285-288,
(40%).
I45 Mileham
A.R., Jeffries A.W., Owen G.W, Pellegrin F., "The
design and performance of walking fitter assembly lines", Proceedings of the
16th International Conference on CAD/CAM Robotics and Factories of the Future,
University of the West Indies, 26-28 June 2000, pp 325-332, ISBN 976-620-140-4,
(90%).
I46 Mileham
A.R., Hardisty H., Clifton D.A., "The effect of electrolyte flow in
electrochemical machining ", Proceedings of the 16th International Conference on
CAD/CAM Robotics and Factories of the Future, University of the West Indies,
26-28 June 2000, pp 589-596, ISBN 976-620-140-4, (100%).
I47 Newnes
L.B., Mileham A.R. and Doniavi A., “Ten Stages to
Optimising Electronic Manufacturing”, Proceedings of the International Computer
Aided Production Engineering 2000 Conference, Edinburgh, Aug 2000, pp 521-530,
ISSN 1356-1448, ISBN1 86058 263X, (30%).
I48
Kirk, C.S., Balogh, A., Béres, L., Mileham,
A.R., (2001), Application of the Finite Volume Method to Prediction of Failure
Zones in Creep resistant Steels, Proceedings of microCAD2001, (H), International
Computer Science Conference, University of Miskolc, 2001. (20%)
I49 Allen N.,
Mileham A.R., Jeffries A.W., "The introduction assembly cells to the
clean room of a medical device manufacturer", 4th International SMESME conference, Aalborg
University, Denmark, May 2001, pp 423-431, ISBN 87-98967-81-5, (50%).
I50
Masuku E S, Mileham A R, Hardisty H,
Bramley A N, Johal C and Detassis P "A finite modelling of the electroplating
process", Proceedings of the 5th International Conference on Manufacturing
Processes, Systems and Operations Management in Less Industrialised Regions,
National University of Science and Technology, Bulawayo, Zimbabwe. April, 2002, pp xx-xx, (50%), ISBN to be added when
published.
I51 Masuku E.S. and Mileham A.R. "Intelligent Mould design for
injection moulding", Proceedings of the 5th International Conference on
Manufacturing Processes, Systems and Operations Management in Less
Industrialised Regions, National University of Science and Technology, Bulawayo,
Zimbabwe. April, 2002, pp xx-xx, (10%), ISBN
0-7974-2456-3.
I52 Kirk C.S.,
Balogh A., Beres L., Mileham
A.R., ”Variability of diffusion coefficients in the analysis of heterogeneous
welded joints”, Proceedings of the 3rd Conference on materials
science, testing and informatics, Hungary, 14-17 March 2002, Published by Trans
Tech Publications (Uuetikon/Zurich Switzerland in Oct
2002pp 431-438, ISBN 0 87849 908 3, (25%)
I53
Kirk, C.S., Horrocks, M., Mileham, A.R., & Chaudhuri, J.B., (2002), Modelling and Simulation of
Vascular Tissue Engineering using the Finite Volume Method, Proceedings of
microCAD2002, (H), International Computer Science Conference, University of
Miskolc, 2002.
I54 Mileham A.R.,
Culley S.J., McIntosh R I, Owen G.W., “The development of a design for
changeover methodology”, Proceedings 2002 International Forum on DFMA, Newport,
RI, USA, June 10-12, 2002, pp 183- 202. Published by Boothroyd Dewhurst Inc
I55
Mileham A R, Hardisty H, Bramley A N, Masuku E S, Johal C and Detassis
P, “A Finite Element Simulation of the Electroplating Process", Proc 18th
ISPE/IFAC Int. Conf on CAD/CAM, Robotics and Factories of the Future,
(CARS&FOF)”, Porto, Portugal, July 2002, pp 263-270, ISBN 972-95194-5-5,
(90%).
I56 Eldridge C., Mileham A.R., McIntosh R I, Culley
S.J., Owen G.W., Newnes L.B., “Rapid changeovers – the run up problem”,
Proc 18th ISPE/IFAC Int. Conf on CAD/CAM, Robotics and Factories of the
Future, (CARS&FOF)”, Porto, Portugal, July 2002, pp 161-168, ISBN
972-95194-5-5, (20%).
I57 Culley S J,
Mileham A R, “The integration of design and business issues in the engineering
curriculum”, Proc 24th SEED Annual Design Conference, and
9th National Conference on Product Design Education, Ed by Evatt M A C , Broadhurst E K,
Coventry University, PEP Ltd, September 2002, pp 37-42, ISBN1-86058 397 0 (10%).
I58
Mileham A R, Hardisty H, Bramley A N, Masuku E S, Johal C and Detassis
P, Seymour N. “Modelling the Electroplating Process", Proc east-Forum2002, FEM
Schwabisch Gmund, Germany, October 10-11th 2002, CD Volume. (90%).
I59 Mebrahtu H., Walker R., Mileham A.R., “Performance
enhancement using an expert mechanism in a manufacturing simulator”, Proceedings
of 1st Industrial Simulation Conference, University Politecnica De Valencia,
I60 Fitton S., Mileham A.R., Owen G.W., “The design of flexible
assembly lines”, Advances in Manufacturing
Technology XVII - Proc 1st International Conference on Manufacturing Research,
University of Strathclyde, September 9-11 2003, pp 179-184, Professional
Engineering Publications (IMechE), ISBN No 1 86058 412 8,
(80%).
I61 Hosseini-Nasab H., Newnes L.B., Mileham A.R., “Automatic
on-screen cost estimation for the conceptual stage of design”, Advances in Manufacturing Technology XVII - Proc
1st International Conference on Manufacturing Research, University of
Strathclyde, September 9-11 2003, pp 235-240, Professional Engineering
Publications (IMechE), ISBN No 1 86058 412 8, (90%)
.
I62 Hall G.,
Mileham A.R., Cockayne D., Davies S., “The design and
implementation a computer integrated manufacturing and business system for
remote working”, Advances in Manufacturing
Technology XVII - Proc 1st International Conference on Manufacturing Research,
University of Strathclyde, September 9-11 2003, pp 403-408 Professional
Engineering Publications (IMechE), ISBN No 1 86058 412 8,
(50%).
I63 Eriksson
K.M., Newnes L.B., Mileham A.R., “A survey investigating current industrial
scheduling practice among a cross-section of UK companies”, Advances in Manufacturing Technology XVII - Proc
1st International Conference on Manufacturing Research, University of
Strathclyde, September 9-11 2003, pp 409-414, Professional Engineering
Publications (IMechE), ISBN No 1 86058 412 8, (25%).
I64 Masuku E.S, Mileham A.R, Owen G.W. and Bramley A.N,
"Incremental sheetmetal forming", Proc IDMME 2004
Conference, pp 13 and CD, April 2004, University of Bath, ISBN 1-85790-129-0,
and in Advances in Integrated Design and Manufacture in Mechanical Engineering,
Springer ISBN 1-4020-3481-4 (25%).
I65 Mileham
A.R., Culley S.J., McIntosh R I, Owen G.W., “Design for changeover and
sustainability”, Proceedings 2004 International Forum on DFMA, Newport, RI, USA,
June 10-12, 2004, pp 185-218, Published by Boothroyd Dewhurst Inc (20%).
I66 M P Reik, S J Culley, G W Owen, A R Mileham and R I McIntosh, "A
Novel Product Performance Driven Categorisation of DFX Methodologies"
Proceedings of the 2nd International Conference on Manufacturing Research, 2004,
7 - 9 September 2004, pp 179-184, Professional Engineering Publications
(IMechE), ISBN 1-84387-088-6 (20%).
I67 Mebrahtu H., Walker R., Mileham A.R., “Knowledge-Based
Optimisation in a manufacturing Simulator”, IMC21, Proceedings of the
21st International Manufacturing Conference (Ireland), 1-3 Sept 2004,
University of Limerick, Ireland, pp 243-250, ISBN 1-8746537-7-1
(20%).
I68 Mebrahtu H., Walker R., Mileham A.R., “Automating Part of
the Model Verification Process”, Proceedings of the 2nd Industrial
Simulation Conference, 7-9 Sept 2004, University of Malaga, Spain, pp 384-388,
ISBN 90-77381-12-0 (20%).
I69 Liu W.,
I70 M P
Reik, R I McIntosh, G W Owen, A R Mileham and S J
Culley, “Design for changeover: enabling the design of highly flexible, highly
responsive manufacturing processes” Proceedings of the International Mass
Customization Meeting 2005 (IMCM’05), Klagenfurt, Austria, Published by
GITO-Verlag Berlin, Jun 2-3, 2005, pp 373-384, ISBN
3-936771-46-4 (10%).
I71 Jeon A.H.J., Low J, Mileham A.R., Bramley A.N., Johal C.,
“Simulating electroplated micro surfaces in 3-D”, 4M2005 Proceedings of the
1st International Conference on Multi-Material Micro Manufacture, 29
June-1st July 2005, Forschungszentrum
Karlsruhe, Karlsruhe, Germany, Proceedings of 4M2005, 1st Int Conf on Multi- Material Micro Manufacture, Elsevier, pp
173-176, Abstracts ISBN 0-080-44729-5. Proceedings ISBN 0-080-44879-8 (90%)
I72 Mileham
A.R., Newnes L.B., Hosseini-Nasab H., “Automatic
On-Screen Cost Estimation at the Early Stage of Design”, Proceedings of
12th International Conference on Concurrent Engineering - Next
Generation Concurrent Engineering, Fort Worth, USA, Published by the ISPE, July
25th-29th 2005, pp 587-589, ISBN 0-9768246-0-4. (90%).
I73 M P Reik, R I McIntosh, G W Owen, A R Mileham and S J Culley,
“The development of a systematic design for changeover methodology” Proceedings
of 15th ICED 05 (Abstracts and CD), Melbourne, Australia, Published
by the Design Society and Engineers Australia, Aug 15-18 2005, Abstract
pp315-316, paper N0 205.44, ISBN 1-904670-00-8 (10%).
I74 Eriksson
K.M., Mileham A.R., Newnes L.B., “A
study of short- medium- and long-horizon final production
scheduling, applying priority rules and using a discrete event simulation approach”, Proc 3rd International Conference on
Manufacturing Research (ICMR2005), Cranfield University, September 6-8 2005, CD file
E2Eriksson, , ISBN No 1 861941 22 6,
(25%).
I75 Jamshidi J., Mileham A.R., Owen G.W. “A Laser Scanning Registration
Technique for Reverse Engineering
Applications”, Proc 3rd
International Conference on Manufacturing Research
(ICMR2005), Cranfield University, September 6-8 2005, CD file
A1Jamshidi, ISBN No 1
861941 22 6, (25%).
I76 Wang Q.,
Owen G.W., Mileham A.R. “Assessing the effect of work
time variations for a
linear walking-fitter assembly line”, Proc 3rd International Conference on
Manufacturing
Research (ICMR2005), Cranfield University,
September 6-8 2005, CD file E2Wang, , ISBN No 1 861941 22 6,
(25%).
I77 Qin Q.,
Masuku E.S., Bramley A.N., Mileham A.R., and
Owen G.W., "Incremental sheetmetal forming Simulation
and Accuracy", Proc ICTP 2005 Conference, CD Paper 484, Oct 2005, University of
Padova, Verona, Italy, ISBN 88-87331-74-X, (15%).
National Refereed Conferences
N1. Mileham A.R., Harvey
S.J., "The avoidance of macro surface defects in ECM", Advances in Manufacturing
Technology I, Proc. lst Nat. Conf. on Prod. Res. pp
374-380, Ed. by McGoldrick P.M., Kogan Page, Nottingham University, September 1985, ISBN 1
85091 039 1, (95%)
N2. Mileham A.R., "Visually interactive scheduling", Proc. 2nd
Annual. Operations Management Association UK Conference, Ed. by D.J.Rhodes,
N3. Mileham A.R., Bucknall K., Hunt L., "An expert systems approach to Machine
Tool Selection", Advances in Manufacturing Technology II, Proc. 3rd Nat. Conf.
on Prod. Res. Ed. P.M. McGoldrick, Kogan Page,
N4. Mileham A.R.,
N5. Semple R., Corderoy M.P., Mileham
A.R., "The design of a robot tool changing system", Advances in Manufacturing
Technology III,
Proc. 4th Nat. Conf. on Prod. Res., Ed. by
N6. Rustom E.A., Mileham A.R., "The development of a generative
CAPP system for prismatic components", Proceedings of 6th Irish Advanced
Manufacturing Technology Conf.,
N7. Rustom E.A., Mileham A.R., "The development of a generative
CAPP system for prismatic components", Advances in Manufacturing Technology IV,
Proc. 5th Nat. Conf. on Prod. Res. Ed.J.Chandler, pp
259‑263, Huddersfield Polytechnic, Kogan Page,
September l989, ISBN 1 85091 704 3, (50%)
N8. Zhang Y., Mileham A.R.,
"A rule based expert system for process planning", Advances in Manufacturing
Technology IV, Proc. 5th Nat. Conf. on Prod. Res. Ed.J.Chandler, pp 333‑337, Huddersfield Polytechnic, Kogan Page, September l989, ISBN 1 85091 704 3, (50%)
N9. Ozkirim M., Mileham A.R., "An approach to a flexible group
technology system using some heuristic procedures", Advances in Manufacturing
Technology IV, Proc. 5th Nat. Conf. on Prod. Res. Ed.J.Chandler, pp 342‑346, Huddersfield Polytechnic,
September l989, ISBN 1 85091 704 3, (50%)
N10.
Rustom E.A., Mileham A.R., "Automatic selection
of raw material in process planning", Proceeding 7th Irish Advanced
Manufacturing Technology Conf. Trinity College, Dublin, August 1990, (refereed
Abstract), (50%)
N11.
Currie C.G., Mileham A.R., Bradford D.T., Miles A.W., "Cost estimation at
the conceptual stage of design", Advances in Manufacturing
Technology V, Proc. 6th Nat. Conf. on Prod. Res., Ed. A. Carrie,
pp l8‑22, Stathclyde Univ
Press, September l990, ISBN 0 902013 72 6, (50%)
N12.
Rustom E.A., Mileham A.R., "Feature ordering
and operation sequencing for automated process planning", Advances in
Manufacturing Technology V, Proc. 6th Nat. Conf. on Prod. Res., Ed. A. Carrie,
pp
368‑372, Strathclyde Univ Press,
September l990, ISBN 0 902013 72 6, (50%)
N13.
Zhou Y., Mileham A.R., "A flexible classification and coding system",
Advances in Manufacturing Technology V, Proc. 6th Nat. Conf. on Prod. Res., Ed.
A. Carrie, pp 353‑357, Strathclyde Univ Press,
September l990, ISBN 0 902013 72 6, (50%)
N14.
Currie C.G., Mileham A.R., Bradford D.T., Miles A.W., "Conceptual cost
estimating using complexity Criteria", Advances in Manufacturing Technology VI,
Proc. 7th Nat. Conf. on Prod. Res., Hatfield Polytechnic, September l99l, ISBN 0
900458 46 1, (50%)
N15.
Owen G.W., Mileham A.R., "The influence of machine failure on transfer
line performance", Advances in Manufacturing Technology VI, Proc. 7th Nat. Conf.
on Prod. Res., Hatfield Polytechnic, September l99l, pp 306‑310, ISBN 0 900458
46 1, (50%)
N16.
Zhang Y., Mileham A.R., "BEPPS‑NC an automated generator of NC programs
for rotational parts from CAD product models", Advances in Manufacturing
Technology VI, ed. D.Spurgeon, Hatfield Polytechnic
Press, September l99l, pp 11‑15, ISBN 0 900458 46 1, (50%)
N17.
Currie, C.G., Mileham, A.R., Bradford, D.T., Miles, A.W. "Conceptual cost
estimating as an aid to the designer", International Operations - Crossing
Borders in Manufacturing & Service, pp 119-124, Ed Hollier, Boaden, New, North
Holland, June 1992, 0-444-881 786, (50%)
N18.
McIntosh R.I., Culley S.J., Gest G.B., Mileham
A.R.," Method study techniques for set-up reduction ", Proc 10th Conf of the
Irish Manufacturing Committee, University College Galway, September l993, pp
1001‑1012, ISBN No 0 90 777563 2. (25%)
N19.
Owen, G.W., Mileham A.R.," A method for buffering transfer lines to
maximise output", Proc 10th Conf of the Irish Manufacturing Committee,
University College Galway, September l993, pp 592-603, ISBN No 0 90 777563 2,
(50%)
N20.
McIntosh R.I., Culley S.J., Gest G.B., Mileham
A.R., "An overall methodology for set-up reduction within existing manufacturing
systems", Advances in Manufacturing Technology VII, ed. by A. Bramley & A.R.
Mileham, Bath University Press, Proc 9th National Conf on Manufacturing
Research, September l993, pp 171‑175, ISBN No 1 85790 007,
(25%)
N21.
McIntosh R.I., S.J., Gest G.B., Mileham A.R.," classifying and selecting set-up
reduction techniques", Advances in Manufacturing Technology VII, ed. by A.
Bramley & A.R. Mileham, Bath University Press, Proc 9th National Conf on
Manufacturing Research, September l993, pp 6‑10, ISBN No 1 85790
007.(25%)
N22.
Linardakis S., Mileham A.R.," Manufacturing
feature identification for prismatic components from CAD DXF files", Advances in
Manufacturing Technology VII, ed. by A. Bramley & A.R. Mileham, Bath
University Press, Proc 9th National Conf on Manufacturing Research, September
l993, pp 37‑41. ISBN No 1 85790 007, (50%)
N23.
Scott A.J., Mileham A.R.," Automated nesting of sheet metal components
onto stock sheets", Advances in Manufacturing Technology VII, ed. by A. Bramley & A.R. Mileham, Bath
University Press, Proc 9th National Conf on Manufacturing Research, September
l993, pp. 242‑246, ISBN No 1 85790 007, (50%)
N24.
Lanham J.D., Smith G., Mileham A.R., "An integrated approach to product
assembly system design", Proceedings of IMI-11, Irish Manufacturing Committee
Conf on Lean Production from concept to product, pp 539-546, September 1994,
Queens Uni, Belfast, (20%)
N25. Linardakis S., Mileham A.R.," A strategy for extracting
features for prismatic components from CAD DXF files", Advances in Manufacturing
Technology VIII, ed. by K. Case & S. Newman, Taylor & Francis, Proc 10th
National Conf on Manufacturing Research, September l994, pp 299‑302, ISBN 0 7484 0254 3,
(50%)
N26.
McIntosh R.I., Culley S.J., Gest G.B., Mileham
A.R. "Design rules for rapid
changeover", Advances in Manufacturing Technology VIII, ed. by K. Case
& S. Newman, Taylor & Francis, Proc 10th National Conf on Manufacturing
Research, September l994, pp 462-465, ISBN
0 7484 0254 3, (25%)
N27.
Gest G.B., Culley S.J., McIntosh R.I, Mileham
A.R. “An implementation level approach for the identification of set-up
reduction techniques", Advances in Manufacturing Technology VIII, ed. by K. Case
& S. Newman, Taylor & Francis, Proc 10th National Conf on Manufacturing
Research, September l994, pp 496-499, ISBN
0 7484 0254 3, (25%)
N28.
Kirk C.S., Mileham A.R., "Gas shielded metal ARC welding, improving
quality by minimisation of defects", Advances in Manufacturing Technology VIII,
ed. by K. Case & S. Newman, Taylor & Francis, Proc 10th National Conf on
Manufacturing Research, September l994, pp 617-620, ISBN 0 7484 0254 3,
(50%)
N29.
Mileham A.R., Culley S.J., "The design of fast tool change systems",
Proceedings of Design and Integrated Production Group/EPSRC Research Conference,
N30.
Linardakis S., Mileham A.R.," A methodology for
extracting manufacturing features for prismatic components from CAD DXF files",
Proc of the 12th Conf of the Irish Manufac Committee
(IMC12 Competitive Manufacturing, pp 71-77, University College Cork, September
1995. ISBN 0-907134-335, (50%)
N31.
Mileham A R, Hardisty H, Shirvani H, "A 2-D
simulation of the electrochemical machining process", Proc Int. Conf on Advanced
Manufacturing (ICAM'95), pp A8, University of Sunderland, Sept 1995,
(50%)
N32.
Kirk C.S., Mileham A.R., Yeo R.B.G, " The role
of wire resistivity in semi-automatic welding quality:
Part 1", Advances in Manufacturing Technology IX -Proc 11th National Conference
on Manufacturing Research, DeMontfort University, pp
47-51, September 1995, Taylor and Francis ISBN 0-7487-04007, (50%)
N33.
Linardakis S., Mileham A.R.," A methodology for
identifying features for prismatic components from CAD files", Advances in
Manufacturing Technology IX -Proc 11th National Conference on Manufacturing
Research, DeMontfort University, pp 159-164, September
1995, Taylor and Francis, ISBN 0-7487-04007, (50%)
N34.
Greville N., Culley S.J., Mileham A.R., "Set up
reduction within the flexographic industry: a case
study", Advances in Manufacturing Technology IX -Proc 11th National Conference
on Manufacturing Research, DeMontfort University, pp
232-236, September 1995, Taylor and Francis, ISBN 0-7487-04007, (40%)
N35.
Ford J., Gillespie P., Mileham A.R., Newnes L.B., Jeffries A.W., "
Measuring supplier performance in a JIT environment", Advances in Manufacturing
Technology IX -Proc 11th National Conference on Manufacturing Research, DeMontfort University, pp 262-266, September 1995, Taylor
and Francis, ISBN 0- 7487-04007, (25%)
N36.
Owen G.W., McIntosh R.I., Mileham A.R, Culley S.J., Gest G.B, "Manufacturing flexibility - a case for excess
capacity", Advances in Manufacturing Technology IX -Proc 11th National
Conference on Manufacturing Research, DeMontfort
University, pp 366-400, September 1995, Taylor and Francis, ISBN 0-7487-04007,
(15%)
N37.
Fernihough A.M., Mileham A.R., Culley S.J.,
"A multi-level technique for the modelling and evaluation of business
strategies", Advances in Manufacturing Technology IX -Proc 11th National
Conference on Manufacturing Research,
N38.
Mileham A R, Hardisty H, Shirvani H, "A study
of frontal equilibrium gaps in electrochemical machining using vee shaped tools", Advances in Manufacturing Technology X -
Proc 12th National Conference on Manufacturing Research, University of Bath,
9-11th Sept, 1996, pp 1-5, ISBN 1-85790-031-6, (80%)
N39 Masuku E. S. Mileham A. R. “Expert rules in mould design for
injection moulding”, Advances in Manufacturing Technology X - Proc 12th National
Conference on Manufacturing Research, University of Bath, 9-11th Sept, 1996, pp
11-15, ISBN 1-85790-031-6, (50%)
N40 Kirk C.S., Mileham
A.R., “Predicting the weld thermal cycle and microstructure in hypoeutectic
steels”, Advances in Manufacturing Technology X - Proc 12th National Conference
on Manufacturing Research, University of Bath, 9-11th Sept, 1996, pp 16-20, ISBN
1-85790-031-6, (50%)
N41 Doniavi A. Mileham A. R. Newnes L. B.“ A systems approach to modelling in the manufacturing
environment”, Advances in Manufacturing Technology X - Proc 12th National
Conference on Manufacturing Research,
N42 Masuku E. S. Mileham A. R. “Process based heuristics for
automated mould design for injection moulding”, Advances in Manufacturing
Technology XI - Proc 13th National Conference on Manufacturing Research,
N43 Doniavi A. Mileham A. R., Newnes L. B. “Computer integrated
systems engineering in an
electronics manufacturing
environment”, Advances in Manufacturing Technology XI - Proc 13th National
Conference on Manufacturing Research, Glasgow Caledonian University, 9-11th
Sept, 1997, pp 103-107, ISBN 1-9012-4811-9, (30%)
N44 Mileham A.R, Culley
S.J., McIntosh R.I., Owen G.W. "Rapid changeover – a pre-requisite for
responsive manufacture”, Proceedings of the IEE Workshop on Responsiveness in
Manufacture, IEE Savoy Place, London, 23 February 1998, pp 12/1- 12/4,
(80%).
N45 Jeffries A.W., Mileham
A.R., "The implementation of an assembly line - a case study", Advances in
Manufacturing Technology XIII - Proc 15th National Conference on Manufacturing
Research, University of Bath, September 1999, pp 485-489, Professional
Engineering Publications (IMechE), ISBN No 1 86508227 3,
(50%).
N46 Bellicoso S., Mileham A.R., "The economics and machining of
316L stainless steel using modern drills and insert tooling - a case study",
Advances in Manufacturing Technology XIII - Proc 15th National Conference on
Manufacturing Research, University of Bath, September 1999, pp 479-483,
Professional Engineering Publications (IMechE), ISBN No 1 86508227 3,
(50%).
N47 Hosseini-Nasab H., Newnes L.B., Mileham A.R., "Computer cost
estimating at the concept design stage", Advances in Manufacturing Technology
XIV - Proc 16th National Conference on Manufacturing Research, University of
East London, September 5-7 2000, pp 107-112, Professional Engineering
Publications (IMechE), ISBN No 1 86508 267 2, (50%).
N48 Lee J.R., Mileham A.R.,
Owen G.W., "Development of principles for ergonomic arena seating design",
Advances in Manufacturing Technology XV - Proc 17th National Conference on
Manufacturing Research, University of Cardiff, September 4-6 2001, pp 75-80,
Professional Engineering Publications (IMechE), ISBN No 1 86058 3253,
(50%).
N49
Kirk, C.S., Bodamyali,T., Stevens, C.R.,
&.Mileham, A.R., (2002), Computer Modelling and Experimental Validation of
Smooth Muscle cell growth using Matrigel as a Basement
Membrane Matrix, Proceedings of the
4th Annual Conference of the Tissue and Cell Engineering Society,
19/20 September 2002, p21, University of Glasgow
N50
Kirk, C.S., Horrocks, M., Mileham, A.R., &
Chaudhuri, J.B., (2002), Modelling and Simulation of
Vascular Tissue Engineering using the Finite Volume Method, Proceedings of the
4th Annual Conference of the Tissue and Cell Engineering Society,
19/20 September 2002, p120, University of Glasgow
N51
Kirk, C.S., and Mileham, A.R., (2002), Modelling Oxygen Availability in
Blood serum, perfleurocarbons and Aqueous Based
Medium, Proceedings of the
4th Annual Conference of the Tissue and Cell Engineering Society,
19/20 September 2002, p121, University of Glasgow.
N52
M P Reik, S J Culley, G W Owen, A R Mileham and
R I McIntosh,
"A Novel Product Performance Driven Categorisation of DFX
Methodologies" Proceedings of the 2nd International Conference on Manufacturing
Research 2004, 7 - 9 September 2004
Other
Conferences (Not refereed)
O1. Mileham A.R., Harvey
S.J., "The effect of workpiece microstructure on
current efficiency during the ECM of carbon steel", Proc. 2nd Joint Int. Conf.
on Prod.
O2. Mileham A.R., Harvey S.J., "The effect of electrolyte flow cavitation in the electrode gap during ECM", Proc. 4th
Poly. Symp. on Man. Eng., Birmingham
Polytechnic, May l984, (95%)
O3. Mileham A.R., Harvey
S.J., Current efficiency variations in ECM", Proc. 5th Poly. Sym. on
Manufacturing Eng., pp 155-164, Brighton Polytechnic, May l986,
(95%)
O4. Mileham A.R., "The development of simulation in manufacture",
Simulation Techn. for
Plan. & Con. of Man. Seminar, Keynote address, Coventry Polytechnic, May
l986, (100%)
O5. Mileham A.R., Isik I., Zhang Y., Rustom E.A.,
"The development of a generative CAPP system", Advanced Manufacturing Seminar,
Coventry Polytechnic, November l988, (95%)
O6. Currie, C.G., Mileham,
A.R., Bradford, D.T., Miles, A.W. "Computer cost estimating at the conceptual
stage of design" proceedings Sunderland Advanced Manufacturing Technology
Conference, Sunderland Poly, April 1992, 2a-2.3., (50%)
O7. Linardakis, S., Mileham, A.R., "A CAD interpreter for
prismatic components", Proc 8th Nat Conf on Manf
Research, pp 21-25, Univ of Central England, September
l992, (50%)
O8. Scott, A.J., Mileham,
A.R. "A code based process planning system for sheet metal components", Proc.
8th Nat Conf on Manf Research, pp l6-20, Univ of Central England, September l992,
(50%)
O9. Owen, G.W., Mileham,
A.R., "The use of buffers to improve transfer line performance", Proc. 8th Nat
Conf on Manf Research, pp 262-266, Univ of Central England, September l992,
(50%)
O10.
Chapman, N.A., Mileham, A.R., McQueen, L.B.,
"Synchronised manufacture through manufacturing systems simulation", Proc 8th
Nat Conf. on Manf. Research, pp 267-271, Univ of Central England, September l992,
(50%)
Invited Papers/Seminars/Posters
V1. Mileham A.R.,
Jeffries A.W. "Total quality management", Invited presentation, United Nations
CCAF Conference, IMO Offices, July 1992
(75%)
V2. Mileham A.R.,
"Simulation in manufacture", invited paper to The Zimbabwe Institution of
Engineers, National University of Science and
V3. Mileham A.R., Currie
G.C., " A parametric approach to cost estimating at the
conceptual stage of design", Invited paper to the Technology Transfer
Association (SW Regional Group),
V4. Mileham A.R., "Reducing
set-up times", Invited paper to the International Printing Corporation,
University of Cranfield, November 1994,
(100%).
V5. Mileham A.R., "TQM in
UK industry", Invited paper for industry, Department of Industrial Engineering,
National University of Science and Technology, Zimbabwe, December 1994,
(100%).
V6. Mileham A.R., Hardisty
H., Shirvani H., "A computer simulation of the
electrochemical machining process", Invited Research Seminar Presentation,
UMIST, Department of Mechanical Engineering, January 1996, (40%)
V7. Mileham A.R., "Linking
Design and Manufacturing through Process Planning", Invited paper for industry,
Department of Industrial Engineering, National University of Science and
Technology, Zimbabwe, May 1996, (100%).
V8. Mileham A.R.,
"Modelling the electrochemical machining process", Invited Research Seminar
Presentation, University of Greenwich, School of Computing and Mathematical
Sciences, November 1997, (100%)
V9 Shirvani H., Mileham A.R., "Electrochemical machining (ECM)
process simulation using moving boundary finite element technique", SET99 Poster
display, House of Commons,
V10 Eldridge C., Mileham
A.R., Culley S.J., Owen G.W., Newnes L.B., “Run up: The hidden cost of
changeover”, IMechE Seminar on Rapid changeovers of food production lines. 13
Dec 2001
V11
Book Reviews
B1. Computer
Integrated Manufacturing Ed. by E. Puente & P. MacConaill, IPS Publications for CIMS Journal,
l989.
B2.
Computerised facilities planning Ed. by H. Lee Hales, IEE Press for CIMS
Journal,1989.
B3. Simulation
of Manufacturing Systems, A. Carrie, Wiley for CIMS Journal, Feb l990, Vol. 3,
No.l, pp 57.
B4. Modern Manufacturing, Ed by Zaremba M B
and Prased B, Springer-Verlag, ISBN 3- 54019-890-3, for Proc I Mech E-Part B, 1995,
Vol 209 B4, pp 327-328, ISSN 0954- 4054.
B5. Intelligent
Manufacturing Systems, Gu P.
and Norrie D.H., Chapman and Hall,
B6.
Manufacturing Management - Principles and Concepts, Gibson P., Greenhalgh G., and Kerr R., Chapman and Hall, London 1996,
ISBN 0 41237 370X, for Proc I Mech E-Part B, 1996, Vol 210 B3, pp 291-292, ISSN
0954- 4054
B7. Micromachining of engineering materials by J M McGeough, Marcel Decker Inc. For
IMechE Proceedings Part B, Journal of Engineering Manufacture. 2002, Vol 216, No B4, pp 607, ISSN
0954- 4054.
Postgraduate
Research Student Supervision
(a) Current postgraduate
supervision:
M Street
1998 MPhil
KT
Industry
Web based learning in industry.
C Eldridge
2000
MPhil/PhD Staff
Run up in Rapid Changeovers
C Brailey
2001 MPhil
KT
TCS
Manufacturing system redesign.
G Hall
2001 MPhil
KT
TCS
Manufacturing system redesign.
D Fronimidis 2001 PhD
EPSRC
Injection moulding machine control (with KAE)
K Ericsson 2002 PhD
Dept
Scheduling in rapid changeover environment
Guo
2003
MPhil/PhD ORS
CAPP for 5 Axes machining (with GWO)
J Jamshidi
2003
MPhil/PhD IMRC
Reverse Engineering (with
GWO)
P Frobisher 2003 MPhil
H Mebrhutu 2002 PhD
(b) Completed Postgraduate Research
Supervision
I. Isik
1989 MPhil
Turkey
Automated feature ordering for the
computer aided process planning of
turned parts,
Y. Zhang
1991 PhD
P R China
The automation of Process Planning from
(British Con)
the CAD product model to NC programs
for rotational Parts, British Council,
E.A. Rustom 1992 PhD
Self
The design of a computer aided
process
planning system for prismatic parts,
N. Chapman 1993 MPhil
SERC
Simulation of Manufacturing Systems
(student)
with L.B Newnes,
G.W. Owen 1994 PhD
SERC
The Buffering of Transfer Lines
(student)
S. J. Steiner 1995 PhD
External
An Investigation into the Scope for the
Introduction of a Dynamic Scheduling
Capability into a Batch Production
Environment,
(with Dr S. Spraggett -
University of Coventry),
University of Coventry
G. B. Gest
1996 PhD
Staff
Feature based classification and
rationalisation of Set-Up reduction
techniques, with S J Culley,
A. J. Scott
1996 PhD
EPSRC
The nesting of sheet metal components,
Student
University of Bath.
G. Currie
1996 MPhil
Staff
Cost estimation of components at the
concept design stage, with A.W. Miles
S. Linardarkis
1996 PhD
SERC
Automatic data transfer from CAD to
Student
CAPP for prismatic components.
J. Ford
1996 MSc KT
Staff
The process and management of
knowledge transfer, with Dr L. B.
Newnes and A.W. Jeffries, University of Bath
M. Fernihough
1997 PhD
RC 1851
TEBS - A Multi-level Technique for
the CMB
Modelling and Evaluation of Business
Strategies, with S.J. Culley,
C. S. Kirk
1998 PhD
Staff
Improvements to quality through weld
thermal cycle Modelling.
R. McIntosh 1998 PhD
Staff
Design for changeovers, with S.J. Culley
A. Doniavi
1999 PhD
Iran
Computer aided systems engineering
approach to electronic manufacturing process modelling. With
Dr L B Newnes,
J. Lanham 1999 PhD
External
An Integrated approach to the Design of
UWE
flow line based assembly systems - UWE
A. Walsh
1999 MPhil
KT
Staff
Continuous improvement in an aerosol
food factory using a process engineering approach. With S.J. Culley and Dr S.J. Wright.
M. Wong
1999 PhD
ESRC/ICL Risk
assessment and risk allocation in
IS/IT private
initiative projects. With Professor C. Tomkins(Management)
E. Masuku
2000 PhD
Zimbabwe
Intelligent CAD mould design for
NUST
Injection Moulding
J Daniels
2001 MPhil
KT
Staff
The design of mixed model assembly
systems.
I
Chatting
2001 PhD
GKN
An attribute management process to enhance
Westland Ae concurrent engineering in the
aerospace industry
H. Hosseini-Nasab 2003 PhD
components
N Allen
2003 MPhil
KT
TCS
The introduction of cellular
manufacturing
within the clean room of a small medical device
manufacturer.
J Lee
2004 MPhil
KT
KTP
Ergonomic design of auditorium seating.
Visiting Scholar
Supervision
Y. Zhou
l988/9 6month
P R China
Tool management within machine
transfer systems (Chinese Government)
External Examining
(a) Research Degrees - External (and Internal) Examining
M.C. Cakir
PhD 1989 The reconstruction of measured engineering
components and their comparison with solid models,
R.R. Spencer
BEng 1991
The influence of DNC on the development of
integrated
systems,
R.G. Wort
PhD 1991
Sensors for quality control in FMS, Bristol Polytechnic,
CNAA.
I.
measuring machines,
Zhou Zhengku PhD 1992
Generative process planning by conjugative coding
design and manufacturing information, Staffordshire
Polytechnic, CNAA.
N. Phelan
PhD 1992
Aspects of the automation of casting pattern making,
B. Zhu
PhD 1993
Optimisation of the grinding process using process
methods and knowledge based systems approach,
University
of the West of England.
V.F. Thompson
PhD 1993 Human
and social factors affecting technology
transfer,
K. Lau
PhD 1993 An expert spring selector,
X.X. Huang
MPhil 1993
The representation of feature-based component
data
model in a knowledge-based
process planning system,
Loughborough University of Technology.
M.Gulesin
PhD 1993 An intelligent knowledge based process planning and
fixturing system using
STEP standard,
L.J.S. Stephen
MPhil 1993
The design and implementation of a manufacturing
system to improve delivery performance and reduce
lead times,
J. M. Comelio
MPhil 1993
The introduction of quality improvement methods
in an
aluminium tube manufacturing company, Cranfield
University.
T. L. Wood
PhD 1994 The selection of
A. Shirvani
PhD 1995 An investigation into the design for damping of
extended length tool holders,
K. J. Aitchison PhD
1995
Rapid and accurate modelling of engine manufacturing
systems,
R. J. V. Lee
PhD 1996 An
injection moulding strategist in an information
model environment, Loughborough University of Technology.
R C Haynes
PhD 1996
Internal hip fracture fixation systems: analysis of
Implant performance for the optimisation of test
protocols,
O A Eltohami
PhD 1996 A
comparison of selected cell formation algorithms: a
simulation based scheduling approach, Cranfield
University.
D R Cox
MSc 1996 A schema for modelling machined components with
applications in automated and assisted process planning,
N B Matupi
PhD 1997
Prediction of manufacturing flexibility by the use of
simulation modelling,
A Holland
MPhil 1997
The implementation of a production planning and
control system in a non-traditional environment,
L N Smith
PhD 1997 A
knowledge based system for powder metallurgy
technology, University of the West of England.
J D
Spencer
PhD 1998 The potential application of temperature control to 3-D
welding
as a rapid prototyping technique,
N Bateman
PhD 1998
Modelling manufacturing system flexibility, DeMontfort
University.
M S Hounsell
PhD 1998
Feature based model validation through intents,
J Goodyer
PhD 1998 A cell
design methodology to enable people to reach
World Class Quality levels within a
cellular manufacturing environment,
M Bleakman
MPhil 1998
CAD architecture for design to cost, UWE.
R Greenough
PhD 1999 A
Hypermedia maintenance information system for team
work environments,
P Head
Res Dip 1999 The use of ISO9000 for supplier assessment,
UWE.
R W Bagshaw
PhD 1999
Production data analysis for discrete component
Manufacture,
W C Liu
PhD 2000
Development of a strategically driven production
facilities management (PFM) framework.
J Higgins
PhD 2000 A design
methodology to deliver World Class Quality
performance within a manufacturing cells.
D Pidcock
PhD 2000 Convex hull generation, connected component
labelling
and minimum distance calculation for set
theoretically defined models.
B Yazdani
PhD 2000
Comparative study of design definition models and product
development in the automobile industry.
J Bradford
PhD 2000 The systemic redesign of manufacturing systems
in
SME’s.
D Clifton
PhD 2001 The characterisation of variables in the ECM process.
R Marsh
PhD 2001
Visual analysis and diagnostic system for injection moulded
Components.
A White
EngDoc
Creating the conditions for Innovation.
University of
2002
Z Salem
PhD 2002
Enhanced computer algorithms for machine learning.
R D Allen
PhD 2002
Representing and handling formal and informal
information
for the selection of components.
M Musbah
PhD 2003 The development of effective cellular manufacturing in a
Fail MPhil
project based organisation,
W A Nicoll
ME 2003
Enabling sustainable performance improvement within the
manufacturing function: a case study in manufacturing
strategy formulation.
P
R D Allen
PhD 2003 An agent based approach to step-NC CAD/
M Rosser
MPhil 2003
The introduction of Concurrent Engineering to a SME.
A Oyarbide Zubillaga
PhD 2004
Manufacturing systems simulation using the principles
of
systems dynamics.
B Sha
MPhil 2005
Micro injection moulding parameters.
M A Williamas
PhD 2006
Creation of a design methodology for devices that improve
human mobility.
R N Muir
PhD 2006 The parameterisation of ECM
J McClennan
PhD 2006 Developing
2-D tool design and simulation models for ECM
Markus Gruneisl
PhD 2006
Dimensioning of an automotive final assembly shop using a
system of key performance indicators.
(b)
BEng/BSc/MEng/MSc Courses - External Examining
1986 to 1991
1987 to 1991
1990 to 1991 University of the West of
1991 to 1996
1991 to 1995
1991 to 1994
MSc Manufacturing Management
1993 to 1996
&
1996 to 1998
BEng CAE (FT/SW)
BEng Electronic Manufacture (FT/SW)
BEng Manufacturing Systems Engineering (FT/SW)
1997 to 01
1998 to 03
BSc Engineering (Euro Bus & Technology)
BEng Industrial
Engineering.
1999 to 01 The
and BEng/ BCom
Programmes.
2000 to 2003 The
(manufacturing
pathway)
2001 to 2002
2003 to
2004 to