Conference or Workshop Items

2010

 

[1] Dolce, F. and Meo, M., 2010. Structural response of laminated composite plates to blast load. In2010 Enginsoft International Conference, 21-22 October 2010, Fiera Montichiari (BS), Italy .

[2] Ciampa, F. and Meo, M., 2010. A New Wavelet Based Algorithm for Impact Identification and Group Velocity Determination In Composite Structures. In5th European Workshop on Structural Health Monitoring, 28 June - 2 July 2010, Sorrento, Italy .

[3] Angioni, S., Visrolia, A. and Meo, M., 2010. A hierarchical multiscale plate model for the efficient simulation of composite laminates. In14th European Conference on Composite Materials, 7-10 June 2010, Budapest, Hungary.

[4] Amerini, F. and Meo, M., 2010. Structural Health Monitoring Of Bolted Joints Using Linear and Nonlinear Acoustic Methods. In5th European Workshop on Structural Health Monitoring, 28 June - 2 July 2010, Sorrento, Italy .

[5] Visrolia, A., Angioni, S. L. and Meo, M., 2010. A hierarchical XFEM plate model for the simulation of composite laminates failure. InECCM 2010: IV European Conference on Computational Mechanics, 16-21 May 2010 , Palais des Congrès, Paris, France.

2009

 

[1] Carotenuto, G., Meo, M. and Milella, E., 2009. A new smart multifunctional polymer nanocomposites layer for the detection of low velocity impact damage in composite structures. In17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.

[2] Guida, M., Grimaldi, A., Marulo, M., Meo, M. and Olivares, G., 2009. Bird impact simulation on fiber metal laminate sandwich leading edge using a coupled FE/SPH approach. In17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.

[3] Barbieri, E. and Meo, M., 2009. Computation of the integrals in reproducing kernel methods. In10th U.S. National Congress of Computational Mechanics, 16 - 19 July 2009, Columbus, Ohio, USA.

[4] Amerini, F., Barbieri, E., Meo, M. and Polimeno, U., 2009. Non Linear Vibration Method to Detect Imperfectly Contact Interfaces in Composite Beams. In17th International Conference on Composite Materials, 27 - 31 July 2009, Edinburgh, UK.

[5] Ussorio, M., Perugini, P., Meo, M., Mataloni, A. and Milella, E., 2009. Damage tolerance modeling in design of space launcher motor cases. InSAMPE 2009 (Society for the Advancement of Material and Process Engineering), 18-21 May 2009, Baltimore, MD, USA.

[6] Dolce, F., Meo, M., Wright, A., French, M. and Bernabei, M., 2009. Glass/epoxy composite armours under blast loads. In7th International Conference on Composite Science and Technology, 20-22 January 2009, Sharjah, United Arab Emirates.

[7] Tsartaris, N., Dolce, F., Polimeno, U., Meo, M., Guida, M., Marulo, F. and Riccio, M., 2009. Low velocity impact behavior of fiber metal laminates. In7th International Conference on Composite Science and Technology, 20-22 January 2009, Sharjah, United Arab Emirates.

[8] Guida, M., Marulo, F., Meo, M. and Riccio, M., 2009. Transient three dimensional finite element analysis of a bird strike on a sandwich fin leading edge. In7th International Conference on Composite Science and Technology, 20-22 January 2009, Sharjah, United Arab Emirates.

2008

 

[1] Barbieri, E. and Meo, M., 2008. Delamination modelling using an element free galerkin approach. In13th European Conference on Composite Materials (ECCM13), 2-5 June 2008, Stockholm, Sweden.

[2] Guida, M., Marulo, M., Meo, M. and Riccio, M., 2008. Evaluation and validation of multi-physics FE methods to simulate bird strike on a wing leading edge. In13th European Conference on Composite Materials (ECCM13), 2-5 June 2008, Stockholm, Sweden.

[3] Polimeno, U., Meo, M. and Almond, D., 2008. Smart nonlinear acoustic based structural health monitoring system. In3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008, 08-13 June 2008, Acireale, Sicily, Italy.

[4] Gonzalez, C. M., Fagan, M., Ansell, M. P. and Meo, M., 2007. Experimental and finite element studies of adhesively bonded lap joints for natural fibre composites. In6th International Conference on Composite Materials (ICCM-16), July 2007.

Dr. Michele Meo

Material Research Centre, Dept of Mechanical Engineering

 

 

 

 

Journal Articles     Conference papers     Books     Book Chapters   Book Sections