Linux version 2.6.14-rc1-3.5.4 (mickey@c3po.tm.informatik.uni-frankfurt.de) (gcc version 3.4.4) #1 PREEMPT Mon Mar 13 15:09:39 CET 2006
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)
Machine: SHARP Shepherd
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   quiet
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 61952KB available (2069K code, 407K data, 392K init)
Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
Mount-cache hash table entries: 512
[ELPP] Searching for initrd_theme preferences... Not found or Incomplete
[ELPP] Disabling the Progress Patch
CPU: Testing write buffer coherency: ok
softlockup thread 0 started up.
NET: Registered protocol family 16
Sharp Scoop Device found at 0x10800000 -> 0xc4800000
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Corgi Backlight Driver Initialized.
Found w100 at 0x08000000.
Console: switching to colour frame buffer device 80x30
fb0: w100fb frame buffer device
SA1100 Real Time Clock driver v1.02
ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Sharp SL series flash device: 800000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Boot PROM Filesystem"
NAND device: Manufacturer ID: 0x98, Chip ID: 0x76 (Toshiba NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "sharpsl-nand":
0x00000000-0x00700000 : "System Area"
Charge LED On
0x00700000-0x02000000 : "Root Filesystem"
0x02000000-0x04000000 : "Home Filesystem"
pxa2xx_udc: version 4-May-2005
input: Corgi Keyboard Registered
input: Corgi Touchscreen Registered
I2C: i2c-0: PXA I2C adapter
i2c: error: exhausted retries
i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
i2c: ICR: 000007e0 ISR: 00000002
i2c: log: [00000446:000007e0] 
Corgi audio driver initialize
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Probing IDE interface ide0...
mmcblk0: mmc0:d317 S016B 14560KiB 
 mmcblk0: p1
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 392K
hda: SunDisk SDCFB-32, CFA DISK drive
ide0 at 0xc4820000-0xc4820007,0xc482000e on irq 40
hda: max request size: 128KiB
hda: 62720 sectors (32 MB) w/1KiB Cache, CHS=490/4/32
hda: cache flushes not supported
 hda: hda1
ide-cs: hda: Vcc = 3.3, Vpp = 0.0
jffs2_do_read_inode(): No data nodes found for ino #2115
jffs2_do_read_inode(): But it has children so we fake some modes for it
Stopping tasks: ================|
Charge LED On
GPLR0 = 8d5f682a,1
is_resume: 1
Disabling charger and turning discharge on
Reenabling charger and turning discharge off
Val10: 210
Restarting tasks... done
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk
usb0: MAC 62:bb:b6:12:58:0a
usb0: HOST MAC ba:2b:76:57:f2:c8
usb0: RNDIS ready
usb0: full speed config #2: 100 mA, Ethernet Gadget, using RNDIS